Barkas B1000 "Pompieri" - (1970) - IST Models

       Barkas B1000 a fost o furgoneta produsa intr-o fabrica noua din Republica Democrata Germana (DDR), pe locul fostei fabrici Framo, in orasul Karl-Marx-Stadt (actual Chemnitz), vechea fabrica fiind luata de rusi ca reparatii de razboi, la sfarsitul anilor '40. Productia a inceput in 1961 si a continuat pana in 1991. A fost propulsat initial de un motor de 45 de cai, in trei cilindri si doi timpi. Acest motor a fost derivat din cel de la DKW si a fost folosit in paralel si de Wartburg. A fost considerat echicvalentul lui VW T1 si T2 pentru Germania de Est, fiind considerat chiar mai bun din punct de vedere practic si al configurabilitatii, datorita amplasarii frontale a motorului. A fost destinat in principal serviciilor publice, iar persoanele private asteptau pana la 14 ani pt unul. S-au produs aproximativ 175.000 de exemplare.

       Macheta, care reprezinta un vehicul de interventii, este produsa de IST Models. Este o macheta "branduita" IST, nu una de revista. A venit cu postament si clopot de plastic transparent. Detaliile sunt de nivel mai ridicat, exceptand niturile din faruri. Stopurile sunt colorate separat, geamurile au chedere argintii iar stergatoarele sunt fin redate. Oglinzile exterioare au "sticla" dar macheta nu are oglinda retrovizoare. La interior avem scaune maro, iar bordul are instrumentele redate prin decaluri.


Barkas B1000 "Feuerwehr" - (1970) - IST Models

        Barkas B1000 was a van produced in a new factory from Deutsch Democratic Republic, on the site of the Former Framo factory, in the actual city of Chemnitz. Production started in 1961 and continued until 1991. It had a 3 cyilinder, 3 stroke, 45 hp engine. This engine derived from the DKW and was also used by Wartburg. Barkas was considered the equivalent of VW T1 and T2 for the East Germany, some features making it even better. It was much more variable in its configuration due to the frontal engine placement. It was mostly used by the public services. Private people waiting upto 14 years to get one. Aprox 175.000 pcs. were produced.

        The scale model, which replicates a emergency vehicle is produced by IST Models. It is a original IST Model, not a magazine one. It came with a stand and a PC-Box. The details are high level, except the headlihts, that have rivets. The backlights are independently coloured, the windows have silver gaskets, and the wipers are fine made. The side mirrors have "glass" but the model does not have a rear-view mirror inside. The seats are brown and the dashboards has the gauges made as decals.

 

 

 

 

 

Zuk A-15 "Pompieri" - (1967) - DeAgostini/IST Models

       Zuk A-15, care in poloneza inseamna "gandac", a a fost o duba (furgoneta) produsa de FSC (Fabryka Samochodów Ciężarowych) in Polonia intre 1958-1998. A fost construit pe sasiul, suspensia si motorul de la Warszawa M20. Aceasta, la randul ei, era de fapt rusoaica GAZ Pobeda produsa sub licenta in Polonia. Zuk si Nysa, bazata pe acelasi sasiu, au fost singurele furgonete din Polonia comunista. Zuk a fost in principal vandut organizatiilor de stat dar si unor persoane private. Pe toata perioada productiei, design-ul s-a schimbat doar la nivelul fetei, in 1967. Posta poloneza si Pompierii au fost principalii utilizatori, Zuk fiind folosit ca masina de pompieri mai ales in micile comunitati.

       Macheta este produsa de IST Models, pt DeAgostini. Este al doilea numar special al colectiei, destul de rar la ora actuala. Este o macheta reusita, fara erori majore. Are doar oglinzile putin strambe. Doar chederul de la parbriz e negru, restul nu sunt vopsite. Pe plafon sunt montate furtunele si scarile, foarte bine replicate. La interior totul este negru, fara decaluri pt instrumente dar replicat corect. Stergatoarele sunt mai bine realizate decat la alte machete DeAgostini.

Zuk A-15 "Pompieri" - (1967) - DeAgostini/IST Models

       Zuk A-15, which in Polish means "bug", was a van produced by FSC (Fabryka Samochodów Ciężarowych) in Poland between 1958-1998. It was based on the Warsawa M20 chassis. Zuk and Nysa, based on the same chassis, were the only vans produced in the communist Poland. Zuk was mainly sold to state organizations and a few to private persons. During its production period, the design changed only slightly on the front part, in 1967. Polish mail service and the Firefighters were the main users of the angular Zuk. Was used as a firetruck in the small communities.

       The scale model, is produced by IST Models, for DeAgostini. It's the second special issue of the collection, quite rare. It's a well made model, without major errors. Only the mirrors are a little crooked. The windscreen gasket is black but the others are not painted. On the roof there are the fire-hoses and ladders, very good replicated. All the interior is black, with no decals. The wipers are better than other DeAgostini models.

 

 

 

 

 

Nysa 522 "Milicja" (1968) - DeAgostini/IST Models

      Dubita Nysa a fost produsa in orasul Nysa din Polonia, din 1958 pana in 1994. Bazata pe aceeasi platforma ca Zuk, platforma imprumutata de la Warszawa, Nysa a avut un design rotunjit, spre deosebire de Zuk, care avea un design unghiular. A fost mult mai buna si mai confortabila pentru transportul de pasageri. In perioada de inceput a productiei, a fost singura duba disponibila, din aceasta cauza fiind folosita intensiv ca Ambulanta si ca masina a Militiei. Varful de popularitate a fost atins in anii '70, iar pana la oprirea productiei uzina din Nysa a fabricat 380.575 de masini. Modelul 522 a fost ultimul din gama Nysa. Nysa a fost exportata in toate tarile Blocului Estic, dar si in cateva tari din Asia sau Africa. In Romania au ajuns cateva dupa '89. Erau o priveliste destul de comuna pana prin 1995, fiind una din masinile micilor SRL-uri, alaturi de Barkas, Zuk, Transit sau T2.

      Macheta reproduce modelul folosit de Militia Poloneza. Este produsa de IST ca numar special pt DeAgostini Polonia. Nu a fost produsa deocamdata in varianta "de strada". Macheta este frumoasa, cu detaliile specifice de militie foarte frumos reproduse. Grila are gaurile reproduse fin, dar nu perforate, farurile au nituri. Chederelor groase le-ar fi stat mai bine negre, iar cromul ce margineste capota motorului nu este reprodus. Personal, imi place mult aceasta masina, de aceea am si facut un mic efort sa o achizitionez, fiind o macheta destul de rara.

Nysa 522 "Milicja" (1968) - DeAgostini/IST Models

      The Nysa van was produced in the city of Nysa in Poland, between 1958-1994. While based on the same platform as the Zuk (taken from Warszawa), Nysa had a rounded design, unlike the angular Zuk. It was much better and confortable as a people carrier. In the first year of production it was the only abailable van, this is why it was extensively used as a Ambulance and Miltia car. It was very popular in the 70s. Until 1994 when the production ceased, about 380.000 Nysas were made. The 522 was the last model. Nysa was exported to all the East Block countries, but also in some countrie from Asia and Africa. In Romania, some were imported in the early '90. It was very popular between the small emerging companies here.

      The scale model replicates the model used by the Polish Militia. It is made by IST as a special series for DeAgostini Poland. It was not produced yet as a street-version. It is very beautiful and well made, with all the specific details for a police car. The front grille has fine holes, not perforated, the headlights have rivets. The window gaskets should be black, and there are some chrome parts missing. I like this model very much, that's why i made some effort to purchase it. It's a quite rare model.

UAZ 469 (1973) - DeAgostini/IST Models

       UAZ 469 este un autovehicul de teren produs de UAZ (Ulyanovsky Avtomobilny Zavod) in Rusia. A fost introdus in 1973 pentru a inlocui vechiul GAZ 69. A fost si este, in general, folosit de Armata Rosie si de alte forte ale Pactului de la Varsovia, cat si de fortele paramilitare din Blocul Estic. In URSS a fost folosit de catre toate organizatiile guvernamentale care aveau nevoie de o masina de teren robusta. Fiabilitatea lui a ajuns legendara, dar masina nu a fost disponibile publicului larg, decat intr-o foarte mica masura.

      Macheta, produsa pt DeAgostini, este reusita, ca si celelalte 2 masini de teren prezentate pana acum. Macheta are o singura oglinda, farurile au nituri, iar vopseaua este mata. Semnalele ar cam trebui sa fie portocalii, dar in general sunt multumit de realizarea acestei machete.

UAZ 469 (1973) - DeAgostini/IST Models

        UAZ 469 is a all-terrain vehicle produced by UAZ (Ulyanovsky Avtomobilny Zavod) in Russia. It was released in 1973 to replace the obsolete GAZ 69. It was, and still is, used by the Red Army and other military and paramilitary forces throughout the East Block. In former USSR, it was use by all the government organizations which needed a though off-road car. His reliability became legendary, but the car was not available for the public.

        The scale model, produced for DeAgostini is well-made like the other 2 offroaders described before. It has only one mirror, the headlights have rivets and the paint is matte. The turning lights should be orange. I am happy with the realization of this model.

GAZ 67 (1943) - DeAgostini/IST Models

           GAZ 67 a fost un autovehicul de teren care a intrat in productie la uzina GAZ din Rusia, in 1943. A reprezentat echivalentul sovietic a Jeep-ului Willys si a fost utilizat intens in cel de-al doilea razboi mondial. A fost succesorul lui GAZ 64, cu care se aseamana mult, dar care a fost produs intr-un numar redus de exemplare. Printre diferente se numara ampatamentul marit si un rezervor mai mare. GAZ 67 era propulsat de un motor de 54 de cai-putere si atingea viteza de 90 km/h. S-a produs pana in 1953, cand i-a cedat locul lui GAZ 69

          Macheta este produsa de IST Models si face parte din colectia DeAgostini din Polonia. Unul asemanator a aparut si in Rusia. Are o realizare spartana cu detaliile de baza. Grila nu este perforata sau macar vopsita. Stergatoarele sunt una cu parbrizul iar la exemplarul meu, copertina este montata stramb.

GAZ 67 (1943) - DeAgostini/IST Models

           GAZ 67 was a Russian all-terrain vehicle, which started production in 1943 at the GAZ plant. It was the soviet equivalent of the Willys Jeep and it was extensively used in WW2. It was the successor of GAZ 64. They were very similar but GAZ 64 was built in a low number of pieces. GAZ 67 had a bigger wheelbase and bigger gas tank. It was powered by a 54 hp engine, able to take the vehicle at 90 km/h. It was produced until 1953 when it was replaced by the GAZ 69.

           The scale model is produced by IST and it belongs from the Polish Deagostini Collection. A similar one was released in Russia too. It has a rough finish with only base details. The front grille is not perforated nor painted. The wipers are the same piece with the windscreen and, at my model, the canvas roof is crooked.

 

 

 

 

 

Dacia Duster "Trophee Andros" (2010) - Spark

         Dacia Duster a aparut in 2010 si este primul SUV produs de Dacia. A fost prezentat ca model de competitie ca o avanpremiera a modelului de serie ce urma a fi lansat, in cadrul unei campanii de marketing bine pusa la punct. A fost construit in intregime de Renault Sport, si are putine in comun cu modelul de serie, avand un motor V6 de 3 litri care dezvolta 350 CP, amplasat central. Caroseria din fibra de sticla imita SUV-ul dar varianta de competitie e mai scurta, si mai joasa. Alain Prost a concurat pe aceasta masina la Trofeul Andros, si a iesit pe locul I in cateva etape

         Am reusit, in cele din urma, sa pun mana pe macheta prezentata aici. Este produsa de SPARK, din rasina in serie limitata la 1200 de bucati. Este foarte fin realizata, specific machetelor din acest material, iar rotile sunt fixe. Muchiile sunt bine definite si nu sunt probleme cu aplicarea vopselei sau a decalurilor. Totul este frumos si atent realizat, cele mai impresionante fiind stergatoarele, dintre care unul este amplasat pe geamul soferului. Blocurile optice nu au nituri. Interiorul este detaliat, cu scaune sport inscriptionate si rollbar. Sub macheta se poate vedea o parte din motor, teava de esapament perforata si carligele de remorcare realizate prin fotodecupare. Este prima mea macheta din rasina si este intr-adevar impresionanta.

Dacia Duster "Trophee Andros" (2010) - Spark

          Dacia Duster was launched in 2010, and it's the first SUV made by Dacia. It was presented as a racing model, a preview of the following series model. It was 100 percent build by Reanult Sport, and it has few common features with the series model. It has a 3 liter V6 engine, that could develop 350 hp. The body, made from fiberglass, resembles to the sUV but it's shorter on the racing version, and much lower. Alain Prost raced with this car at the Andros Trophee, and got a first place in a few events.

        I managed, after all to get this scale model, that I presented here. It's produced by SPARK, from resin. It's limited to 1200 pcs. It's very fine made, like resin models usually are, but the wheels are glued and not spinning. The edges are very well defined and there are no problems with the paint and the decals. Everything is beautiful and carefully made, the most impressive being the wipers. The lights don't have rivets. The interior is detailed, with sport chairs and rollbar. Under the model, a part of the engine, perforated exhaust pipe and towing rings are visible.

 

 

 

 

 

 

 

 

 

GAZ 69 (1953) - DeAgostini/IST Models

        GAZ 69 a fost un autovehicul 4x4 produs in Rusia la Gorkovskij Awtomobilnyj Zavod intre 1953 si 1955. Dupa aceasta perioda producta sa mutat la uzina UAZ, dar masina a ramas cunoscuta tot sub numele de GAZ 69. Cea mai comuna a fost varianta in doua usi si prelata, care la nevoie sa putea demonta. GAZ 69 s-a produs sub licenta de catre Aro sub numele de M57 (M de la Muscel). Aro a dezvoltat in continuare modelul, producand Aro M59 si Aro M461 care s-a produs pana in 1975.

        Macheta este produsa de IST Models pt DeAgostini, fiind una dintre cele mai reusite machete din colectie. Am avut ocazia sa compar macheta DeAgostini cu macheta originala IST si singura diferenta sunt ceasurile de bord si bineinteles modul de ambalare, modelul IST avand cutie de plexi. Prelata se poate detasa, fiind vizibile cele doua manete de viteze si bancutele pentru pasagerii din spate. Culoarea este mata, specifica modelelor de armata. A fost prima macheta DeAgostini achizitionata si sunt foarte multumit de ea.

 GAZ 69 (1953) - DeAgostini/IST Models

       GAZ 69 was a 4x4 vehicle, produced in Russia, at  Gorkovskij Awtomobilnyj Zavod between 1953 - 1955. After this, the production was moved to the UAZ plant, but the model remained known as GAZ 69. The most common version was the 2 door, removable soft-top model. GAZ 69, was built under license by Aro, in Romania, by the name M57 (M from Muscel). Then, Aro developed the model, and produced Aro M59 and Aro M461. Aro M461 stayed in production until 1975.

       The scale model is produced by IST Modeles, for DeAgostini, and it's one of the best models from the DeA collection. The soft-top is removable, making the interior with the 2 gear-sticks visible. In the back there are 2 benches for the passengers. The color is matte,  like army models usually have. It was my first DeAgostini models, and I am very pleased with it.

GAZ M20 "Pobeda" Cabrio (1946) - DeAgostini/IST Models

        GAZ M-20 "Pobeda" Cabrio, este varianta decapotabila in 4 usi a modelului Pobeda facut de rusi. In spiritul acelor vremuri, transformarea in "cabrio" s-a facut fara prea multa bataie de cap, inlocuindu-se metalul cu panza, fara nici cea mai mica schimbare de design. In acealsi stil s-au facut, cativa ani mai tarziu, GAZ69A si ARO 241, mai cunoscute in Romania.

        Macheta face parte din colectia DeAgostini din Rusia, si deocamdata este o macheta exclusiv pt ei. Realizarea machetei este similara cu a modelului Hard-top prezentat aici .

GAZ M20 "Pobeda" Cabrio (1946) - DeAgostini/IST Models

        GAZ M-20 "Pobeda" Cabrio, is the 4-door convertible version of the Pobeda car made by the russians. In the spirit of that times, the transformation to convertible was made without too much struggle. They just replaced the metal with the canvas without any design change. In the same style, a few years later, GAZ69A and Aro 241 were made.

      The scale model belongs to the DeAgostini collection from Russia, and until now it only available there. The features of the model are similar with the hard-top model presented here.

GAZ M20 "Pobeda" (1946) - DeAgostini/IST Models

         GAZ M-20 "Pobeda" (pobeda[rus]=victorie) a fost produs in Uniunea Sovietica intre anii 1946-1958. S-a produs sub licenta si in Polonia sub numele de Warszawa. A fost proiectata cativa ani mai devreme de inginerul Andrei A. Liphart, iar primele teste s-au facut la Gorky Avto Zavod (GAZ) in 1943. A primit numele de Pobeda intr-o perioada cand victoria URSS-ului in WW2 parea probabila. Pobeda s-a exportat cu succes in alte tari printre care si Romania. Avea un motor de 2.1 litri - 4 cilindri care producea 50 cai putere si atingea viteza maxima de 105 km/h. Din Pobeda s-au derivat cativa ani mai tarziu o varianta decapotabila in 4 usi si GAZ M-72 o varianta 4x4 supra-inaltata.

        Mi-am dorit mult aceasta macheta. Era cea pe care o asteptam cel mai mult din colectia din Ungaria. Dupa Dacia, bineinteles . E destul de ok realizata, cu toate detaliile specifice modelului. Vopseaua are mici imperfectiuni sub forma unor umflaturi. Lampile spate sunt cam prost facute, fiind cromate si dat cu rosu peste. Bordul este facut corect si detaliat dar nu este vopsit.

GAZ M20 "Pobeda" (1946) - DeAgostini/IST Models

         GAZ M-20 "Pobeda" (pobeda[rus]=victory)  was produced in the Soviet Union between 1946-1958. It was also produced under license in Poland, named Warszawa. It was designed in the first '40s by the engineer Andrei A. Liphart, and first tests were conducted at the GAZ plant. It received the name of Pobeda in a period when the victory of USSR in WW2 seemed probable. Pobeda was successfully exported in other countries, Romania as well. It had a 4 cylinder, 2.1 liters engine, 50 bhp, and it could reach 105 km/h. Some years later, from Pobeda derived a 4-doors convertible and a 4x4.
 
        I wished this scale model very much. It was my favourite from the Hungarian colection, after Dacia, of course. It is ok realized, with all the specific details. The paintjob has some small errors, blisters. The taillights are poorly done, chromed and painted with red over the chrome.  The dashboard is is well done, but not painted, nor visible gauges.